新闻动态

首页 > 新闻动态
如何减少井盖模具误差的存在
发布人:管理员   发布时间:2021-6-19

井盖模具也是如此,我们允许误差的存在,但是这个差值要控制在一定的范围内不能过大,这样才不会影响其正常使用。

The same is true for the cover plate mold. We allow the error to exist, but the difference should be controlled within a certain range and not be too large, so as not to affect its normal use.


井盖模具的生产工艺是很重要的,它是根据模具设计图纸规定进行生产的,成品的产品可以通过各种方式进行成型,而且脱模快

The production process of the cover plate mould is very important. It is produced according to the stipulations of the mould design drawing. The finished product can be shaped in various ways, and the demoulding is fast


除此之外还具有循环使用的优点,成本低廉、省时省力可以降低工程成本,而且模具拆装简单、误差低,可以更好的保证井盖的质量和耐性。

In addition, it also has the advantages of recycling, low cost, time-saving and labor-saving, which can reduce the engineering cost, and the die disassembly is simple, with low error, which can better ensure the quality and durability of the cover plate.

                                                


降低井盖模具的误差可以提高模具的质量,加强它的工作效果,做到不渗漏不外泄,可以有效起到环保节能的功效。

Reducing the error of the cover plate mould can improve the quality of the mould, strengthen its working effect, make sure that there is no leakage, and can effectively play the role of environmental protection and energy saving.


如果产品的质量有问题会给使用者方面增加很大的压力,在生产过程中出现的损失将会更加严重,会造成批的出现安全故障。由此可见,质量对井盖模具来说非常重要,所以广大生产厂家一定要保证其质量的可靠性,避免使用中给广大用户朋友带来麻烦。


If there is a problem with the quality of the product, it will increase the pressure on the users, and the loss in the production process will be more serious, which will cause batch safety failure. It can be seen that the quality is very important for the cover plate mold, so the majority of manufacturers must ensure the reliability of its quality to avoid troubles to users and friends in use.